Current Stock List

Automotive Machinery - Conrod Machinery
690 Landis Gardner SDG6 Horizontal Double Sided Disk Grinder
The Landis Gardner disk grinder has a maximum wheel size of 42". This machine has been grinding connecting rods and is fitted with a rotary carrier. Machine was new in 1980.

Automotive Machinery - Crankshaft Machinery - Angle Approach Grinders
JAG182 Landis 3SE CNC 350mm x 1000mm x 30 degrees Angle Approach Grinder
The Landis CNC Angle Approach Grinder has a maximum length of 1000mm and a swing of 350mm. It has Siemens 3 CNC control, a servo driven workhead, two hydraulic steady rests, Marposs E5 gauging system and a Landis Truform profile wheel dresser. Year of manufacture 1988.

Automotive Machinery - Crankshaft Machinery - Crankshaft Milling machines for milling pins and journals
PER01 Heller RFK 200/1250/2 Crankshaft Twin Head Internal Milling Machine
New in 1992, the Heller RFK 200/1250/2 Crankshaft Twin Head Internal Milling Machine takes a maximum crankshaft length of 1250mm. The machine was previously producing a 6 cylinder crankshaft (870mm long) and it was milling the crankpins. It is a manual load machine. It is in a very good condition.
PER02 Heller RFK 200/1250/2 Crankshaft Twin Head Internal Milling Machine
New in 1992, the Heller RFK 200/1250/2 Crankshaft Twin Head Internal Milling Machine takes a maximum crankshaft length of 1250mm. It was previously producing a 4 cylinder crankshaft (617mm long) and it was milling the crankpins. It has an overhead gantry loader with 2 load/unload arms. It was partially refurbished mechanically 4 years ago and is in a very good condition.

Boring Machines - Vertical
SKU16494 Graffenstaden Model 1615/L Vertical Borer with elevating rail
The Graffenstaden Vertical Borer has a 1000mm diameter table and is equipped with elevating rail and tooling.
WES02 Webster Bennett 36" CNC Vertical Borer (Vertical Turret Lathe) with fixed rail
The Webster Bennett CNC borer has a 36" table and is equipped with a fixed rail and Fagor CNC control.
WES03 Webster Bennett 36" CNC Vertical Borer (Vertical Turret Lathe) with fixed rail
The Webster Bennett CNC borer has a 36" 4 Jaw Chuck (Max Swing 49"), Fixed Rail and Fagor 2 Axis CNC control.
WES01 Webster Bennett 36" CNC Vertical Borer (Vertical Turret Lathe) with fixed rail
The Webster Bennett CNC borer has a 36" table and is equipped with a fixed rail and Fagor CNC control.
GARD02 Webster Bennett 48" Vertical Turret Lathe (Boring and Turning Mill) with elevating rail
The Webster Bennett 48" Vertical Turret Lathe (Boring & Turning Mill) is equipped with elevating rail and Accurite 2 axes dro.
AA06 Webster Bennett 48" Vertical Turret Lathe (Boring and Turning Mill) with fixed rail
The Webster Bennett 48" Vertical Turret Lathe (Boring & Turning Mill) is equipped with fixed rail and 2 axes dro.
GARD01 Webster Bennett T Series CNC 48" Vertical Turret Lathe (Boring and Turning Mill) with elevating rail
New in 1990, the Webster Bennett T Series CNC 48" Vertical Turret lathe (VTL) is eqipped with elevating rail.

Broaching Machines
GOOD02 Cardinal Detroit Broach Model 15-42 Internal Vertical Pull Broach
New in 2000, the Cardinal Detroit Broach Model 15-42 Internal Vertical Pull Broach has a 15 ton capacity and a 42" stroke.

Crankshaft Machinery
675C Hegenscheidt 7812 Fillet Rolling machine
The Hegenscheidt 7812 Fillet Rolling machine can take up to a 700mm length of crankshaft and was producing a 5 bearing crank.
504F Hegenscheidt 7812 Fillet Rolling machine
The Hegenscheidt 7812 Fillet Rolling machine can take up to a 700mm length of crankshaft and was producing a 5 bearing crank.
675L Hegenscheidt 7812 Fillet Rolling machine
The Hegenscheidt 7812 Fillet Rolling machine can take up to a 700mm length of crankshaft and was producing a 5 bearing crank.
797 Heyligenstaedt Heynumat 10U/1000 CNC Lathe / Crankshaft Turning machine
New in 1982, the Heyligenstaedt Heynumat 10U/1000 CNC Crankshaft Turning machine has a capacity of 1000mm and is equipped with Sinumerik 6T CNC control.
404 NORTON Warner Swasey 31 Crankolap Crankshaft Lapping machine
The Norton Warner Swasey 31 Crankolap Crankshaft Lapping machine is set for a 4 cylinder 600mm shaft and is equipped with 9 arms and a thrust wall attachment, bayonet type component feed/infeed.
675H Tempest Dibb 2 Station Crankshaft Washing machine
New in 1995, the Tempest Dibb Crankshaft Washing machine is a 2 station machine.

Drills
APG12 Archdale 5 Foot Radial Arm Drill
The Archdale Radial Arm drill has a box table and No. 5 Morse Taper.
SUL02 Asquith 6PT 19/72 6ft Arm Radial Arm Drill
The Asquith 6PT 19/72 Radial Arm Drill has a 6 foot arm and has spindle speeds of 8 - 1560rpm.
SUL03 Kitchen and Wade E32 Model 12/54 Radial Arm Drill
The Kitchen and Wade E32 Model 12/54 Radial Arm Drill has spindle speeds of 40 to 20240 rpm.

Electrical Spares - Atlas Copco
ATL03 Atlas Copco Input / Output Card IO 0.1
Atlas Copco Input / Output Card IO 0.1 Part No. 8113704+
ATL02 Atlas Copco Axis Controller SC1
Atlas Copco Axis Controller SC1 Part No. 8113703+
ATL01 Atlas Copco Master Drive QMM340-15
Atlas Copco Master Drive QMM340-15 Part No. 8113701+ (2 available)

Forklifts & Materials Handling
BSN06 Ezi-Lift Elim 250/150 EH Electric Hydraulic Platform Lift
New in 2000, the Ezi-Lift platform lift can lift up to a maximum of 250kgs. and up to 1.5m in height. It comes with battery charger.

Gear Machinery
TUR01 Demm DS 300 NC CNC Gear Shaper
The Demm DS 300 NC Gear Shaper has a maximum pitch diameter of 300mm and a maximim module of 6,5. It has a maximum face width of 50mm and is equipped with Siemens CNC control.
CNH04 Drummond Maxicut 3A Gear Shaper
The Drummond Maxicut 3A Gear Shaper has an external and internal pitch diameter of 18" and is equipped with change gears.
NEW02 The Gear Grinding Co. Ltd. Lead Gear Measuring Machine
This Lead Gear Measuring Machine has 2 x Taylor Hobson Amplifiers, 1 x Taylor Hobson Chart Recorder and 1 x Ernest Turner gauge and also comes with loose tools.

Grinding Machines
664 Brown and Sharpe 618 Micromaster Surface Grinder
The Brown & Sharpe surface grinder has a workable size of 6" x 18" and a maximum longitudinal travel of 22". It comes with a magnetic chuck.
657 Lumsden 93ML Vertical Spindle Rotary Surface Grinder
The Lumsden 93ML has a 60" (1500mm) diameter magnetic chuck and a 34" (864mm) segmental wheel diameter. New 1969.
548 Lumsden 90MLT Vertical Spindle Rotary Surface Grinder
This Lumsden Vertical Spindle Rotary Surface Grinder has a 24" (600mm) dia. mag. chuck with a retractable table. The segmental wheel diameter is 16" (406mm).
1067 Okamoto Linear L350B Grind-X Precision Toolroom Surface Grinder
New in 2000, this Okamoto Linear L350B Grind-X Precision Toolroom Surface Grinder has a 150mm x 350mm magnetic chuck and Heidenhain dro. It has a maximum grinding length of 350mm, maximum grinding width of 150mm and a grinding wheel diameter of 205mm.
1031 Ghiringhelli M2120 DI. MIA Dual Slide Centreless Grinder
The Ghiringhelli Dual Slide Centreless Grinder has a width and diameter of grinding wheel 127 x 500 x 304.8mm. It is complete with MIA (electro hydraulic controls for automatic cycle plunge feed grinding), hydraulic profile dresser to control wheel, rotary diamond motorized dresser to grinding wheel, slide compensation, overhead loading conveyor, hydraulic and coolant tanks and fittings. New 1984.
FOR3 Herzog HTS 2000 Rotary Foundry Samples Grinder
The Herzog Rotary Foundry Samples Grinder cost £22,700.00 in year of manufacture (2004). It comes with Siemens Simatic OP3 PLC control and a large quantity of spares. The machine grinds steel and iron samples of different dimensions for the purpose of spectroscopic analysis.
DD031 Myford MD 400 CNC Cylindrical Grinder / Angle Approach Grinder
New in the early 1990's, the Myford Cylindrical (Angle Approach) grinding machine takes 400mm between centres and has a maximum swing of 160mm. It is fitted with Allen Bradley GE 8200 2 axis control system and have an automatic program for wheel dressing.
DD032 Myford MD 400 CNC Cylindrical Grinder / Angle Approach Grinder
New in the early 1990's, the Myford Cylindrical (Angle Approach) grinding machine takes 400mm between centres and has a maximum swing of 160mm. It is fitted with Allen Bradley GE 8200 2 axis control system and has an automatic program for wheel dressing.
AP01 Okuma Matrix CNC Angle Approach Grinder
The Okuma Matrix angle approach grinder takes 2.2m between centres and is fitted with Siemens 810G CNC control and a Darenth coolant filtration system.
DD035 Thompson Matrix 6C Surface Grinder
The Thompson Matrix Surface Grinder has a table size of 415mm x 2200mm and has a 'Fine' Humphreys electromagnetic chuck (385mm x 1830mm) which has been reconditioned within last 12 months at a cost of over
CNH08 Avyac Auto 4 Axes CNC Tool & Cutter Grinder
The Avyac Auto 4 Axes CNC Tool & Cutter Grinder is equipped with Delta S control. There are 2 machines available.
CNH10 Blanchard 20K36 Vertical Spindle Rotary Grinder
The Blanchard 20K36 Vertical Spindle Rotary Grinder has a 36" diameter chuck and is equipped with a segmented grinding wheel.
CNH03 Blanchard No 18 Vertical Spindle Rotary Surface Grinder
The Blanchard No. 18 Vertical Spindle Rotary Surface Grinder has a 30" diameter magnetic chuck and a doughnut type wheel.
AA17 Butler Newall CNC 3000 Cylindrical / Roll Grinding Machine
New in 1987, the Butler Newall CNC roll grinder takes 3050mm between centres and has a 1000mm swing. It is equipped with Marposs E14 CNC control system, Marposs Positionar Positioning gauge and a Hoffman Hydrocompressor Auto balancing Unit.
STF09 Churchill Surface Grinder
The Churchill Surface Grinder is a hydraulic machine and is equipped with coolant.
CHN10 Rowland Slag Grinder
The Rowland Slag Grinder has a 16" diameter wheel.
CNH13 Union Double Ended Grinder
The Union Double Ended Grinder is equipped with 14” diameter wheels.
CNH12 Walter Helitronic HMC 300 CNC 5 axes Tool & Cutter Grinder
New in 1994, the Walter Helitronic HMC 300 CNC 5 axes Tool & Cutter Grinder has the following capacities x = 600mm, y = 270mm and z = 260mm and the maximum workpiece diameter is 320mm.

Inspection Equipment
FOR04 Baty SM23B Profile Projector
The Baty profile projector comes with a 22" diameter screen, a 20x magnification lens and a 50x magnification lens.

Laboratory Test Equipment
BSN11 Instron 1026 Bench Model Tensile Testing Machine
The Instron Bench Model Tensile Tester is equipped with a chart recorder and an operator's foot pedal.

Lathes
STF01 Dean Smith & Grace DSG Pony 1508 CNC Lathe / Turning Centre
The Dean Smith & Grace DSG Pony 1508 CNC Lathe is equipped with Philips 3000 control and is fitted with a 3 jaw chuck.
AA05 Drummond Maximatic 30" Automatic Multi-Tool Lathe
The Drummond Maximatic Automatic Multi-Tool Lathe tales up to 30" (760mm) between centres and has a maximum swing over bed of 12" (304mm).
SUL04 H. Ernault Somau Lathe
The H. Ernault Somau Lathe has an 18" swing and takes 60" between centres.
STF08 Harrison M300 Straight Bed Centre Lathe
The Harrison M300 Straight Bed Centre Lathe takes 24" between centres and has a 12" diameter swing. It is equipped with Mini Wizzard 2 Axes dro.
1083B Kinwa Model CL38 x 2000 CNC Centre Bed Lathe
New in 2002, this Kinwa CNC Lathe is in excellent condition. It will take 2000mm between centres with a 660mm swing. It is equipped with Fanuc 0i-T Control system, 4 station turret, QCTP, tailstock, 3 jaw power chuck, 4 jaw chuck, steady and tooling.
GMP01 Lang Model 14A4 Sliding Surfacing and Screwcutting Lathe
The Lang lathe takes 48" (1200mm) swing in gap and has 18ft. (5000mm) distance between centres. It is equipped with a 4 jaw chuck, faceplate, taper turning attachment and quick power traverse.
DER09 Stanko Model 165 5 metre Heavy Duty Centre Lathe
New in 1975, the Stanko heavy duty Centre Lathe takes 5 metres between centres and has a 40" swing over the bed. It is equipped with Anilam 2 Axes dro and has point fixed and travelling steadies.

Machining Centres - VMC
GOOD01 Cincinnati Sabre 1000 Vertical Machining Centre
New in 1995, the Cincinnati Sabre 1000 Vertical Machining Centre is equipped with a 4th axis and Acramtic 850 SX CNC Control.

Milling Machines
STF05 Bridgeport Series 1 Interact CNC Mill
The Bridgeport Series 1 Interact CNC Mill has a 42" x 16" table and is equipped with Heidenhain 155 CNC control.
STF02 Bridgeport Series II Interact 4 CNC Mill
The Bridgeport Series II Interact 4 CNC Mill has a 1200mm x 420mm table and is equipped with Heidenhain CNC control.
STF06 Bridgeport Turret Mill
The Bridgeport Turret Mill has a 48" x 9" table and is equipped with a vari speed head and Heidenhain 2 Axes dro.
STF07 Bridgeport Turret Mill
This Bridgeport Turret Mill has been rebuilt by Braithwaite Machine Tools and is equipped with 3 axes Anilam Wizzard 900 dro, Vari speed head and a riser block.
STF04 Huron MU6 Universal Milling Machine
The Huron MU6 Universal Milling Machine has a 2000mm x 470mm table and is equipped with Anilam Wizard 900 dro.
STF03 TFY Model 1154 Turret Mill
New in 1991, the TFY Model 1154 Turret Mill has a 54" x 10" table and is equipped with 2 axes dro.
WOO01 XYZ DPM 4000 CNC Mill
New in 1999, the XYZ DPM 4000 CNC Mill has a 14" x 54" table and is equipped with 3 Axis AGE 3 CNC Control.

Miscellaneous Machines
CON01 Assets formerly employed in the business of Conair Europe Ltd.
For sale assets formerly employed in the business of Conair Europe Ltd. - new product and demonstration equipment and spares available. Vast amount of new spares stock for Conair, Churchill and Rapid products. Chillers, dryers, granulators, temperature control units available.
HBO01 Hegenscheidt Type 7489 Burnishing Machine for valves
New in 1973, this Hegenscheidt burnishing machine was formerly employed in the production of automotive valves.

Planers
CNH05 Butler Opensided Planer
The Butler Opensided Planer has a table size of 96" x 30" and has Hydraquip milling attachment fitted.

Presses
KB Denison 10 ton Multipress
Capacity 10 Ton (US) Multipress with a 12" stroke, 3.635" cyl bore, 18" daylight and a 7.5hp motor.
AA1 Baltec 33KN LP Straight Acting Pneumatic Press
New in 1999, the Baltec press has an air pressure of 2 - 6 bar with a maximum stroke of 60mm. Its maximum force is 33Kn.

Sheet Metal Machinery
SUL01 Rhodes Hydraversal 3.1m x 15mm Guillotine
The Rhodes Hydraversal 3.1m x 15mm Guillotine is equipped with nine hydraulic clamps, powered back gauge, bar and angle cropping facility.

Spline Rolling
757 Excello Rotoflo 3237 Spline Rolling Machine
1980 Spline Rolling Machine with a maximum stroke of 42 inches and a maximum rack length of 36 inches. The machine takes a maximum workpiece diameter of 1.625 inches.

Tables - Rotary Powered
STF10 Societe Genevoise Type P1-5 Rotary Table
The Societe Genevoise Type P1-5 Rotary Table has a 450mm diameter.
Copyright © 1982-2010 S.I.M. Machine Tools