|
Stock Ref: DD031
Serial No. Md163088BTA
New in the early 1990's, the Myford Cylindrical Grinding machine which is set for angle approach grinding takes 400mm between centres and has a maximum swing of 320mm with raised headstock. It is fitted with Allen Bradley GE 8200 2 axis control system and has an automatic program for wheel dressing.
- Fitted with Allen Bradley GE 8200 2 axis control system
- Set for angle approach grinding
- 320mm swing with raised headstock
- Automatic program for wheel dressing
- Marposs E5 in process gauging and edge finder
- Coolant
- Filter beds
- Machine footprint 3.2m x 2.1m x 2m (l x w x h)
| Machine Specification |
Metric |
Imperial |
| Maximum grinding diameter |
175mm |
6 7/8" |
| Swing over table |
178mm |
7" |
| Maximum table travel (grinding) |
420mm |
16 1/2" |
| Capacity between centres |
400mm |
15 3/4" |
| Table swivels either way |
10 degrees |
|
| Maximum rec. component weight (between 60 degree centres) |
14.5 kilos |
32lbs. |
| Nett weight of machine |
2159kg |
4760lbs |
| For transit machine divides into 4 units maximum lift required |
1769kg |
3900lbs |
| |
|
|
| Wheelhead |
|
|
| Working travel |
140mm |
5 1/2" |
| Maximum positioning speed (fixed) |
2.5M/min |
100"/min. |
| Minimum plunge rate |
0.2mm/min |
0.008"/min |
| Wheel speeds |
1500 & 1647rpm |
|
| Grinding wheel (recessed) |
355 x 38 x 127mm |
14 x 1 1/2 x 5" |
| Minimum wheel diameter for zero work diameter |
305mm |
12" |
| Wheelhead motor |
3kW |
4hp |
| Retract distance |
Programmable within total travel |
|
| Plunge depth |
Programmable within total travel |
|
| Minimum step feed on diameter |
0.001mm |
0.00004" |
| |
|
|
| Carriage |
|
|
| Maximum positioning speed |
6.3M/min |
250"/min |
| Minimum traverse speed |
0.5mm/min. |
0.2"/min. |
| |
|
|
| Workhead |
|
|
| Work speeds steplessly variable |
50 to 1000rpm |
|
| Inching speed (manual only) |
20rpm |
|
| Capacity through standard drawtube |
25.4mm |
1" |
| Maximum collet capacity (5C) |
25.4mm |
1" |
| Workhead motor |
.75kW |
1hp |
|
