Demm DS 300 NC CNC Gear Shaper
Stock Ref: TUR01
Enlargeable Machine Images
The Demm DS 300 NC Gear Shaper has a maximum pitch diameter of 300mm and a maximim module of 6,5. It has a maximum face width of 50mm and is equipped with Siemens CNC control.
| WORKING LIMITS | |
|---|---|
| Maximum pitch diameter (External gears) | 300mm |
| Maximum pitch diameter (Internal gears) | 300mm |
| Maximum module | 6,5 (4 D.P.) |
| Maximum face width | 50mm |
| Maximum helix angle (using 5" cutter) | 45 degrees |
| Maximum diameter of fixture | 485mm |
| DIMENSIONS | |
| Maximum overall length | 3050mm |
| Maximum overall height (zero raise) | 2500mm |
| Maximum overall depth | 2780mm |
| WEIGHTS (APPROX.) | |
| Net Weight (Machine & motors) | 5500kg |
| Machine crated (for domestic shipments) | 5950kg |
| Machine boxed (for export) | 6400kg |
| STANDARD FEATURES INCLUDE: | |
| Electrical system suitable for three phase a.c. (3 phase 380V / 50HZ) (in accordance with I.E.C. standards) | |
| Self braking two speed main motor: | |
| DS 300 NC Model 50 | 5,5/3,7 kW, 4/6 poles |
| DS 300 NC Model 100 | 6,6/4,4 kW, 4/8 poles |
| Electric circuit pre-set for executing the cycle through numerical control | |
| Hydraulic system with hydraulic power unit apart. | |
| Electric servo-control, with ball re-circulating screw, for the infeed and rapid radial work slide movement (axis "X) | |
| Centralized, automatic, general lubrication (progressive system) | |
| Self contained reservoir in work slide for lubrication of ways, worm and worm wheel (lower index) | |
| Centralized cooling system with coolant unit apart and coolant return in unit tank. | |
| Couple of 3 step sheaves (driver and driven) with proper V belts | |
| Work change gears (for one setup on a given part.) | |
| Work spindle top plate with "T" slots | |
Enquire about this machine
N.B. The above information has been obtained with care to the best of our ability. It is given in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not form a representation or constitute a contractual term. Prospective purchasers are advised to check any vital details. Complete Health and Safety Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with the requirements of the act with respect to guarding etc. We would like to remind prospective purchasers to ensure that a guarding specialist or their own health and safety officers inspect the goods prior to use.